10x 4FT LED Light 6500K Daylight White Fluorescent Replacement Tube T8 T10 T12

Description: Normal 0 false false false EN-US X-NONE X-NONE This is a case of 10 LED tubes designed to replace fluorescent 4 foot tube lights after rewiring your fixtures. This particular LED is very popular with electricians and homeowners alike because it has been designed to fit into all fluorescent light fixtures with the G13 double pin ends. It is no longer important to know the T number, this one bulb fits both T8, T10 and T12 making it great for working on multiple jobs with different fixtures. Enjoy the savings on the smallest quantity we offer at an amazing price for a limited time! First you will need to disconnect the ballast. Next one end of the tube needs to have an input power of 110-277 volts AC. At the other end of the tube you must connect neutral for the light to turn on. IMPORTANT: Only one end of the tube can be connected power and the other end connected to neutral. You CANNOT connect + and - to the same end. The LED's are configured for maximum light output and the highest efficiency so the internal power supply is not dimmable and the cover over the LED's is frosted/milky to provide an even spread of light. Each 4 foot long tube uses about 18 watts of power and produces about 1600LM. The color temperature is 6500K so the light output is bluish color referred to as daylight white or pure white. 6500K is very popular because the light blue color mimics natural daylight from the sun. LED Advantages Compared To Fluorescent Bulbs LED's have become a popular investment because of the instant savings in electricity from removing the florescent bulb and ballast which also wastes electricity. LED's offer more advantages than the immediate electricity savings: There is no delay or flicker at start up, LED's provide full brightness immediately. Fluorescent bulb manufactures are beginning to publicize the fact that in order to reach the bulb's life expectancy, you must turn the bulbs on for a minimum of 3 hours or you will see a shortened service life. LED's do not suffer this pitfall. You will not shorten the life expectancy of LED's by turning them on and off many times during the day. LED's are not effected by cool temperatures, LED's provide full brightness even at below freezing temperatures. LED's do not have a "warm up" period. LED's do not contain Mercury so there are no disposal fees at the end of the bulb's life. In fact you may be able to receive money for recycling LED's. In many areas, scrap metal yards will pay you when you drop off LED bulbs for recycling because of the valuable aluminum heat sink along the entire length of the bulb. LED's do not waste energy by lighting the back of the light fixture. The LED light is distributed in a wide flood beam spread of 120 degrees so light reaches were it is needed. Specifications: 110-277 Volt AC Input Power G13 Bi-Pin Ends 120 Degree Wide Flood Beam Spread 6500K Color Temperature CRI of 75

Price: 49.99 USD

Location: Troy, Michigan

End Time: 2024-07-21T18:35:39.000Z

Shipping Cost: N/A USD