Blackmagic ATEM 1M/E Production Studio 4K Flypack, HyperDeck Pro2, Laptop, Mixer

Description: BMD System #6 Blackmagic ATEM 1 M/E Production Studio 4K Live Broadcast SwitcherBlackmagic HyperDeck Studio Pro 2 - 4KLenovo Thinkpad Helix 2 Touchscreen Ultrabook Laptop/Tablet with Windows 10Rolls RM-67 Audio Mixer, StarTech Rack Power,Middle Atlantic QBP-2 Rack Blower, Acer V226HQL MonitorSKB Flyer 4U Fly-Pack Road-Case Selling a 4K broadcast studio system - Blackmagic ATEM 1 M/E Production Studio 4K Switcher (SWATEMPSW1ME4K), a BMD HyperDeck Studio Pro 2 - 4K (HYPERD/ST/PRO2), Lenovo Thinkpad Helix 2 Touchscreen Ultrabook laptop/tablet with Windows 10 Pro, Acer V226HQL Full HD Monitor, Rolls RM-67 1U Audio Mixer, StarTech Rackmount Power Distribution Unit, Middle Atlantic QBP-2 Rack Blower, SKB Flyer 4U Roller Fly-Pack Road-Case with laptop mount. Everything in the rack is in great condition with minimal cosmetic wear, the SKB Flyer 1SKB-ISF4U case is new, the Lenovo laptop and the Acer HD Monitor are also in great condition. All this together new would have cost around $7700, you can "buy it now" lightly used for a lot less $$$. Manufacturer information below: Blackmagic Design ATEM 1 M/E Production Studio 4K Overview The Blackmagic ATEM 1 M/E Production Studio 4K is a live event multicamera production switcher with 10 individual Ultra HD inputs built into a 1 RU chassis. Supporting NTSC/PAL/HD and Ultra HD video formats, the switcher connects to a wide range of cameras and sources, delivering a single program stream in UHD 4K, HD, or SD video. All this is done live and in real time with no rendering required. The switcher features a reference video input for synchronizing the switcher to other equipment using tri-level or black burst sync. Each input also features a frame synchronizer, which allows you to use cameras that do not feature genlock as well as input video from computer sources.The switcher provides eight video outputs that are always active. It features two SDI and one HDMI program output, both of which deliver UHD/HD/SD, with three pass-through (AUX) UHD/HD/SD outputs that can deliver a clean program feed without any downstream effects. The switcher also features a down-converted HD output for monitoring on an SDI-equipped HD monitor. Multiview monitoring is 1080i only over dedicated SDI or HDMI output, and multiview allows you to view the program, preview, and eight live sources at the same time. The switcher features built-in luma and chroma keyers for real-time effects and composites in Ultra HD, with 10-bit processing. Two downstream keyers allow you to use two graphics/logos/titles/lower thirds from up to twenty stored graphics in a wide variety of formats.A built-in 12-channel audio mixer handles the embedded HDMI and SDI audio from the 10 active video inputs, as well as audio from the balanced or unbalanced analog audio inputs to provide you flexibility and creative audio options. Audio output is embedded in the SDI and HDMI streams, as well as available via balanced audio outputs. Either a Mac or Windows PC running the included ATEM software controls the switcher's operation and settings. For those who like the feel of a physical control panel, the available ATEM ME 1 and ME 2 Broadcast Panels, connected via the Ethernet port, also control all the features of the switcher. Illuminated front-panel buttons allow you to locally select the AUX output, while a 2" LCD screen built into the front of the unit allows you to see the AUX output for instant confirmation of the correct output.VideoThe ATEM 1 M/E Production Studio 4K switcher supports Ultra HD 4K video (3840 x 2160), which is four times the resolution of Full HD. The video format is set by the user and must be the same across each input, as the switcher cannot scale different input formats to match the project format.The switcher features ten single-link 6G-SDI and one HDMI 4K input, which allows you to connect UHD/HD/SD and computer-based signals to the switcher. However, the HDMI input is shared with one of the SDI inputs, so you can only have a maximum of ten inputs.The switcher takes reference video in for sync timing, either black burst or tri-level sync, so it can interface with other post-production equipment.Each input incorporates a frame synchronizer, which enables you to use cameras that do not have genlock capability or to input computer sources such as Keynote or PowerPoint presentations.AudioThe switcher includes a built-in 12-channel audio mixer that lets you manually mix sources, or you can set mixer inputs for "audio-follows-video", so your audio crossfades as you switch between sources.Video OutputsThe switcher features two program outputs for the final video, delivering UHD/HD/SD via two 6G-SDI port and one HDMI 4K connector.The multiview output is available via an SDI or HDMI connector.The switcher features an SDI AUX output capable of delivering the program out feed with or without the downstream keyer effects in SD, HD, and Ultra HD. Control of the AUX output is by the front-mounted panel buttons and the built-in 2" LCD screen for immediate confirmation of the AUX output.Multiview MonitoringThe multiview output features four selectable screen layouts that show eight inputs or six inputs and the two internal media players, plus preview and program outputs, on one screen at the same time.EffectsTransitionsThe ATEM 1 M/E Production Studio 4K switcher features four built-in transitions:Cut: ATEM instantly changes from the current program source to the preview source precisely at the moment you hit the button. Cuts can be performed by directly selecting sources on the program bus or more commonly by pressing the cut button to transition to the next source lined up on the preview bus.Mix: This dissolves from one image to another. You can program a pre-set transition rate, or use the included software control panel or available hardware panels to manually transition from one shot to another.Dip: This is similar to the mix/dissolve, except it first transitions to a color/graphic or video source and then to the next shot.Wipe patterns: With 18 built-in wipe patterns, you can create over 100 different transitions, the patterns can be inverted or softened, and you can customize the color of the border. You can also insert up to three live video streams into the borders.Key Frameable TransitionsThe built-in DVE allows you to create keyframe-based DVE moves, flying graphics, and animated stingers.KeyersThe switcher features four upstream keyers and a DVE, allowing you to layer live video, title, graphics, and animation over live video. You can choose from chroma, luma, linear, and pattern keys at Ultra HD resolution with 10-bit processing.Two downstream keyers allow you to add graphics, lower thirds, titles, and logos for a polished live production.The DVE allows you to create a picture-in-picture effect.Control InterfaceThe switcher features backlit front-panel control buttons for manual control.The ATEM 4K switcher uses an Ethernet connection to interface with control surfaces such as the optional ATEM 1 M/E and 2 M/E Broadcast Panels.You can also control the switcher by using the included ATEM Software Control software from a Mac or Windows computer over Ethernet. You can control all production settings of the switcher as well as directly import graphics from your computer into the switcher's media pool.You set the format for each project you are working on, from SD to HD to Ultra HD, selecting resolution and frame rate. This is accomplished by using either the included software for macOS/Windows PC or via the ATEM 1 M/E or ATEM 2 M/E Broadcast Panel.Using the Ethernet port on the switcher allows you to connect control surfaces directly to the switcher, or you can control the switcher across a network.The switcher features a USB port that is used for software updates and to set the switcher's chassis IP address, which can only be done by using a computer running the ATEM Switcher Utility connected to the switcher's USB port.RackmountThe switcher is 1 RU in height and has built-in rackmount ears, for mounting in a production road case or a pos-production facility.PowerThe internal redundant power supplies allow you to keep working should one fail. Blackmagic Design ATEM 1 M/E Specs Effect Types1 x DVE and Stinger4 x Chroma Key7 x Luma KeyDownstream Keys2 x AlphaGenerators7 x Pattern2 x ColorProcessingSwitching TypePushbutton, SoftwareLatency2 LinesColor Processing10-BitInputNumber of Video Input Sources10Video Input Connectors10 x BNC (3G-SDI / 6G-SDI / HD-SDI / SD-SDI)1 x HDMIInput Video FormatSDI (10-Bit)UHD 4K: 23.98/24/25/29.97/30 fps1080p: 23.98/24/25/29.97/50/59.94 fps1080i: 50/59.94 fps720p: 50/59.94 fpsPAL: 25 fpsNTSC: 29.97 fpsHDMIUHD 4K: 23.98/24/25/29.97 fps1080p: 50/59.94 fps1080i: 50/59.94 fps720p: 50/59.94 fpsPALNTSCAudio Input Connectors2 x 3-Pin XLR1 x 2RCAEmbedded Audio InputSDI: 2-Channel (per Input)OutputVideo Output Channels1Video Output Connectors2 x BNC (3G-SDI / 6G-SDI / HD-SDI / SD-SDI) (Program)1 x BNC (HD-SDI) (Program)1 x HDMI (Program)1 x BNC (3G-SDI / 6G-SDI / HD-SDI / SD-SDI) (Preview)3 x BNC (3G-SDI / 6G-SDI / HD-SDI / SD-SDI) (Pass-Through)Output Video FormatSDI (10-Bit)UHD 4K: 23.98/24/25/29.97/30 fps1080p: 29.97/50/59.94 fps1080i: 50/59.94 fps720p: 50/59.94 fpsPAL (768 x 576)NTSCHDMI (10-Bit)UHD 4K: 23.98/24/25/29.97 fps1080p: 50/59.94 fps1080i: 50/59.94 fps720p: 50/59.94 fpsPAL (768 x 576)NTSCAudio Output Connectors2 x 3-Pin XLRMultiview Output10-Way Multiview viaSDI10-Way Multiview viaHDMIConnectivityOther I/O1 x BNC Blackburst, Tri-Level Sync1 x RJ45 LAN1 x USB Type-B1 x DE-9/DB-9 RS-422Video Standard ComplianceSMPTE 259M/292MHDCP SupportNoneDisplayDisplay Size2"HardwareOS CompatibilitymacOS 10.7 or LatermacOS 10.8 or LaterWindows 7Windows 8Power Connector2 x IEC C14 InputPower ConsumptionDevice: 100 to 240 VAC (300 W)GeneralRack Form Factor1 RUDimensions19 x 9.25 x 1.7" / 48.26 x 23.5 x 4.32 cmWeight5.73 lb / 2.6 kg Blackmagic Design Hyperdeck Studio Pro 2 Overview The Blackmagic Design HyperDeck Studio Pro 2 is a file-based deck that features the same functionality and control of professional tape decks. It records uncompressed video with 4:2:2 color sampling at 10-bit in .mov format, and also records video using either ProRes or DNxHD codecs. With two SSD slots, you can record almost endlessly as one SSD becomes full, recording automatically continues to the other. The Studio Pro features one 6G-SDI input and output for 4K signals, and three SD/HD/3G-SDI inputs and outputs. It supports UHD 4K via HDMI. It also features analog component in/out, analog audio in/out, and timecode in/out.The Studio Pro 2 is a 1 RU rack-mountable unit with built-in rack mount ears. It features illuminated front panel button control and a jog/shuttle wheel for analog scrubbing. RS-422 control is supported for external control. You can also control the unit using either the USB port or over Ethernet via the RJ45 connector. An integrated LCD on the front panel allows you to monitor the video and display both timecode and transport information.RackmountFile-Based RecordingThe HypeDeck Studio Pro 2 records to uncompressed Quicktime at 10-bit with 4:2:2 color sampling. It also records to ProRes 422(HQ), ProRes 422, ProRes 422 (LT), ProRes 422 (Proxy), as well as Avid DNxHD and Avid DNxHD MXF.Two SSD BaysThe Unit incorporates two 2.5" SSD slots, that allow you to record almost endlessly as recording seamlessly switches from one SSD to the other as the first one fills up.Video SignalsThe HyperDeck Studio Pro 2 supports SD, HD, and 3G signals over SDI and HDMI. In addition to NTSC and PAL signals, 720 x 480p and 720 x 576p signals are supported over HDMI, while 4K video is supported via 6G-SDI and HDMI.OutputsAll outputs are active at all times, so playback is available from all outputs simultaneously, no matter what the original input. This applies to playback from a computer or the SSDs. The exceptions are that 4K output is only available over the 6G-SDI and HDMI connectors, while 480p & 576p are only available as HDMI output.VTR Style ControlsThe HyperDeck Studio Pro 2 features VTR style front panel controls for record and playback. With illuminated buttons, for working in dim locations or settings, while a built-in jog/shuttle wheel provides analog style control over your playback.RemoteThe unit is controllable via RS-422 control and over the Ethernet or USB port.Built-In LCD MonitorThe unit's front panel also features a built-in LCD screen that allows you to monitor input or playback video as well as timecode, format, and audio levels.Included SoftwareThe HyperDeck Studio Pro 2 includes HyperDeck Utility, Media Express, Disk Speed test, Blackmagic System Preferences, and Blackmagic driver software. Blackmagic Design HyperDeck Studio Pro 2 SpecsGeneralVideo InputDigital Video3 x SDI (10-Bit SD/HD/3G Switchable)1 x SDI (10-Bit SD/HD/3G/6G UHD Switchable)1 x HDMI 1.4 Type-A (Supports UHD 4K)Analog Video1 x Component YUV (3 x BNC) SD/HDVideo OutputDigital Video3 x SDI (10-Bit SD/HD/3G Switchable)1 x SDI (10-Bit SD/HD/3G/6G UHD Switchable)1 x SDI Monitor Output (10-Bit SD/HD/3G Switchable)1 x HDMI 1.4 type A (Supports UHD 4K)Analog Video1 x Component YUV (3BNC) SD/HDAudio InputAnalog2 x 3-Pin XLR Balanced Connectors2 x RCA Jacks for Unbalanced AudioDigitalSDI16 x Channels Embedded in SD and HD in QuickTime Files2 x Channels in Avid DNxHD MXF files.HDMI8 x Channels Embedded in SD and HD in QuickTime Files2 x Channels in Avid DNxHD MXF FilesAudio OutputAnalog2 x 3-Pin XLR Balanced ConnectorsDigitalSDI16 x Channels Embedded in SD and HD in QuickTime Files2 x Channels in Avid DNxHD MXF Files.HDMI8 x Channels Embedded in SD and HD in QuickTime Files2 x Channels in Avid DNxHD MXF FilesTimecodeInput: 1 x XLROutput: 1 x XLRComputer Interface1 x USB 2.0 Mini-B for Initial Setup, Software Updates and HyperDeck Utility Software ControlSSD Interface2 x 2.5" SATA-II or SATA-III 3Gb/sMedia FormatsExFAT (Windows/Mac) or HFS+ (Mac)Sync InputBlackburst or Tri-SyncDevice ControlSony-Compatible RS-422 Deck Control PortRecorderRecorder Control:12 Buttons and Jog Wheel for Local Control /or Use Either RJ45 Ethernet or USB 2.0 High-Speed InterfaceRecorder Configuration:Use USB 2.0 High-Speed InterfaceFormat SupportUHD 4K (HDMI Only)2160P: 30/29.97/25/24/23.981080p: 60/59.94/50/30/29.97/25/24/23.981080PsF: 30/29.97/25/24/23.981080i: 60/59.94/50720p: 60/59.94/50525i: 59.94 NTSC625i: 50 PALSDI ComplianceSMPTE 259M, 292M, 296M, 425MSDI Metadata SupportTimecode: HD RP188Closed Captioning: CEA-708Video Sampling4:2:2Audio Sampling48 kHz, 24-BitColor Precision10-BitColor SpaceREC 601REC 709Multiple Rate SupportSDI and HDMI Switchable between SD, HD and UHD. SDI Switches between 270 Mb/s Standard Definition SDI, 1.5G-SDI HD, 3G-SDI and 6G-SDI. Analog SD/HDCopy ProtectionHDMI Input is Unable to Capture from Copy-Protected HDMI Sources.Always Confirm Copyright Ownership Before Capture or Distribution of Content.Codecs SupportedUncompressed QuickTimeApple ProRes 422 (HQ) QuickTimeProRes 422 QuickTimeProRes 422 (LT) QuickTimeProRes 422 (Proxy) QuickTimeAvid DNxHD QuickTimeAvid DNxHD MXF up to 1080i60Operating SystemsMac 10.14 MojaveMac 10.15 Catalina or LaterWindows 8.1 and 10LCD DisplayColor 2.2" / 5.6 cmInternal Power Supply110-240 V, 50-60 HzOperating Temperature41 to 104°F / 5 to 40°COperating Humidity0% to 90% Non-CondensingStorage Temperature-4 to 113°F / -20 to 45°CRack Size1 RU / Less than 7" / 18 cm DeepDimensions (WxDxH)19 x 6.18 x 1.75" / 48.26 x 15.7 x 4.45 cmWeight4.4 lb / 2 kgRolls RM67 Overview The Rolls RM67 Mic/Source Mixer is versatile enough to handle applications ranging from sound reinforcement, home audio routing, recording, bar or club install and more. The RM67 features 3 balanced XLR inputs, switchable bettween Mic and Line level signal. +12 VDC phantom power is provided for powering condenser microphones. There are 4 stereo paired, RCA inputs for connecting consumer line level devices such as cassette decks, CD players etc.The RM67 has individual channel gain controls for each Mic and Line input located in the front, and a Mic insert jack allows users to insert a signal processor such as a compressor or EQ. The Talk Over and Music/Program Priority signal control can momentarily the defeat or emphasize background signals, making the RM67 a sensible solution for public address paging or juke boxes.Both XLR & RCA I/OThe RM67 features 3 balanced XLR inputs (ch 1-3) that are switchable to except either Mic or Line level signal. Also featured are 4 stereo paired RCA inputs (ch 1-4) for connecting consumer line level audio devices.Talk Over FeatureThe "Talk Over" feature gives Mic input 1 and Source input 4 priority over existing signal. This allows the RM67 to be used for paging or moderating a conference or discussion.Music / Program PriorityMuch like the "Talk Over" feature, Music priority allows similar operation with line signal as opposed to only microphones. When signal triggers the priority input, all other signal is defeated. Use this feature with devices such as juke boxes.Mic InsertThe Mic Insert jack sets the RM67 apart from most other utility, rack mount mixers. The Insert can be used to connect signal and effect processors such as compressors, EQ's, reverbs, delays etc.Main & Record OutputsThe Balanced 1/4" TRS phone provide low-noise, high-gain stereo outputs. Stereo RCA (L/R) connectors provide a separate stereo "Record" output to cassette decks, CD recorders, etc.Remote VolumeA remote potentiometer can be used to control volume without having to be near the actual unit.Phantom PowerThe RM67 provides +12 VDC Phantom power to condenser microphones. Rolls RM67 SpecsInputs3 Mic - Balanced XLR female4 Stereo Line - RCA (L/R) Stereo (each channel 1-4)OutputMain Outputs - Stereo (L/R) 1/4" TRS PhoneRecord Out - Stereo (L/R) RCAAdditional Inputs/Outputs"Mic Insert" - 1/4" Phone for inserting an external signal processor to Mic inputs 1-3"Remote Volume" - 1/4" TRS Phone remote volume control via external potentiometerLink Input/OutputNoImpedanceMic: 600 ohms XLR balancedLine: 22k ohmsSource: 22k ohms gold plated RCAMic Insert: 22k ohms 1/4"GainMic: 60dBSource: 26dBTHD & Noise-80dB, THD: < .025%, S/N Ratio: 96dBFrequency Responsenot specified by manufacturerMeteringPeak Indicators (peak) - Mic ch. 1-3Controls9 Rotary Potentiometers (Pots):Gain control on Mic Channels 1-3 and Source Channels 1-4Bass Control: +/-12dB 100HzTreble Control: +/-12dB 11kHz3 Mic/Line Switches:Mic Channels 1-3 (rear panel)6 Dip Switches:(rear panel)Phantom PowerTalk OverMono/StereoPhantom Power+12 VDCPower120 VAC 50/60 Hz 15 VADimensions19 x 1.75 x 6" (48.3 x 4.5 x 15cm) (W x H x D)Weight5 lbs (2.3kg)Lenovo Helix Ultrabook OverviewThe Lenovo ThinkPad Helix 2nd Gen 20CG0021US 11.6" Multi-Touch 2-in-1 Ultrabook Computer has a unique convertible design where the screen can be detached from the keyboard dock, allowing for four different modes. Notebook mode lets you maximize your productivity. Stand mode allows you to view photos and watch videos with ease. Tablet mode lets you utilize the touchscreen. Tent Mode is when you stand the Helix up, resembling a tent and suitable for PowerPoint presentations. The Helix comes with an Ultrabook Pro keyboard dock.The 11.6" widescreen display is a capacitive touchscreen for multi-touch gestures incorporated in Windows 8.1 Pro. The screen has a 16:9 aspect ratio and a Full HD 1920 x 1080 native resolution powered by integrated Intel HD Graphics 5300. You can also output video to an external display via micro HDMI or mini DisplayPort.The system is powered by a dual-core 1.2 GHz Intel Core M-5Y71 processor. It also has 4GB of onboard 1333 MHz DDR3L RAM, a 128GB solid state drive, a front 2.0-megapixel camera, a rear 5.0-megapixel camera, NFC, 802.11ac Wi-Fi, Bluetooth 4.0, an integrated digital microphone and built-in stereo speakers with Dolby Home Theater v4 technology.Windows 8.1 Pro (64-bit) improves the user experience of Windows 8 with several additions and changes. Windows 8.1 Pro rolls out the Start button (although its functionality differs from its predecessor) and you will also be able to boot directly to the traditional desktop screen instead of the Windows 8 Start Screen. Windows 8.1 Pro introduces a redesigned Start screen with tiles that update in real-time. Windows 8.1 Pro also focuses on cloud storage as well as offers various apps through the Windows Store. Windows 8.1 Pro also focuses on data security. BitLocker drive encryption helps protect corporate data. SmartScreen services help protect you from malicious sites and software on the Internet. Windows 8.1 Pro provides a unique user experience that differs from previous versions of Windows.Lenovo ThinkPad Helix 2nd GenFour Modes, Versatile DesignThe Lenovo ThinkPad Helix 2nd Gen is more than just an Ultrabook, it can be used in four distinct modes to maximize its portability and performance. Notebook mode allows you to use the Lenovo ThinkPad Helix 2nd Gen as a traditional notebook. Stand mode is more for viewing photos and watching movies with the screen facing away from the keyboard. Tent mode is achieved with the Helix standing on its two edges with its hinge at the highest point for conducting presentations using graphs or PowerPoint slides. Tablet mode is when you detach the screen from the keyboard dock and use it as a multi-touch tablet when you don't have desk space to work on.Dual-Core Broadwell Intel Core M-5Y71 PerformanceThe Lenovo ThinkPad Helix 2nd Gen houses a Broadwell Intel Core M-5Y71 processor. Its dual cores can reach a stock speed of 1.2 GHz. The processor can also be overclocked up to 2.9 GHz, thanks to Intel Turbo Boost 2.0 technology. With a dedicated 4MB L3 cache, 4GB of 1333 MHz DDR3L RAM and Intel Hyper-Threading technology, you'll be able to multitask between applications quickly and efficiently.11.6" Multi-Touch DisplayThe 11.6" touchscreen on this Lenovo ThinkPad Helix 2nd Gen utilizes multi-touch gestures integrated into Windows 8.1 Pro. The display also has a 16:9 aspect ratio and a Full HD 1920 x 1080 native resolution powered by integrated Intel HD Graphics 5300. You can also output video to an external display via micro HDMI or mini Displayport.Wacom Digitizer PenThe Lenovo ThinkPad Helix 2nd Gen comes with an included Wacom digitizer pen that supports hover, tip and pressure modes. The Wacom digitizer pen has a button for selection and does not require batteries to operate. For convenience, the pen attaches to the keyboard while you're traveling.Stay ConnectedFor Internet access, the Lenovo ThinkPad Helix 2nd Gen comes with dual-band 802.11ac Wi-Fi for a fast, wireless connection. In terms of wirelessly connecting to peripherals, you'll be able to utilize the Bluetooth 4.0 technology.Video ChattingStay connected with friends and family using an online video-chatting service with two cameras, three microphones, and stereo speakers. The front fixed-focus 2 MP camera lets other people see you while you chat with them. The rear camera lets you take 5 MP photos and has auto focus so you can take better looking pictures to share on online social media websites.Windows 8.1 Pro (64-Bit)The Return of the Start ButtonAfter many requests from Windows users, the Start button makes its triumphant return in Windows 8.1 Pro. While it may not be exactly the same as its predecessor in Windows 7, the Start button has two core functions. A left click on the Start button will take you to the Windows 8 Start screen featuring live tiles. A right click on the Start button brings up an advanced menu where you can access the Device Manager, Control, Network Options, and more.Boot Directly to the DesktopWindows 8.1 Pro gives you the choice of booting to the Windows 8 Start screen with live tiles or booting to the familiar desktop screen of Windows 7. Users can also boot directly into an app or app view if they choose to.Seamless Integration of Multi-Touch GesturesWindows 8.1 Pro supports multi-touch gestures. Now, you can use your keyboard, mouse or the touchpad using simple gestures. Whether you're browsing apps, reading a book or typing on the go with touch, you'll be able to seamlessly switch between all three interactive components. With the touchpad, Windows 8.1 allows you to use multi-touch gestures, such as swipe, drag, tap, slide, pinch-to-zoom, and more.To the CloudWith Windows 8.1 Pro, when signed in using your Microsoft account, you'll have instant access to your personal Start screen, themes, language preferences, browsing history and browser favorites. You can also connect to services such as Microsoft Outlook, Facebook, Linkedin, Twitter, and more.Windows StoreIn the Windows Store, you can search for or browse thousands of apps. Choose from the featured apps or grab one of the most frequently downloaded apps to see what all the hype is all about. You can also see how other people rate apps. For certain apps, you can try it out before you buy it so you can make sure you absolutely want an app before you purchase it.BitLockerBitLocker drive encryption helps protect corporate data on mobile PCs that include a trusted platform module (TPM) chip. BitLocker now encrypts hard drives more quickly, helping to keep your data safe without interrupting your productivity. BitLocker also supports encrypted drives.SmartScreenSmartScreen services help protect you from malicious sites and software on the Internet. It checks the reputation of any new app or website in order to keep you safe no matter what browser you're using. This helps prevent malware and other viruses from infiltrating your PC or your corporate network.DirectAccessDirectAccess allows remote users to more securely and seamlessly access resources inside of a corporate network without having to launch a separate virtual private network (VPN) connection.Windows Media CenterWindows Media Center lets you turn your PC into a home entertainment system that can play and record high-definition TV (if you have additional tuner hardware), DVDs, and CDs. It also has a software DVR that can play photo slideshows and Internet TV content.Lenovo Helix Ultrabook SpecsPerformanceProcessorIntel Core M-5Y10c Dual-CoreBase Clock Speed800 MHzMaximum Boost Speed2 GHzGraphics TypeIntegratedGPU1 x Intel HD 5300DisplaySize11.6"Resolution1920 x 1080FinishGlossyMaximum Brightness370 cd/m2Viewing Angle (H x V)170 x 170°Input/Output ConnectorsPorts1 x USB 3.1 Gen 1Display1 x Micro-HDMIAudio2 x Integrated Speaker3 x Integrated MicrophoneExpansion Slots1 x Smart CardMedia Card SlotsmicroSD/SDHC/SDXCCommunicationsWi-FiWi-Fi 5 (802.11ac)BluetoothBluetooth 4.0WebcamUser-Facing:Power Requirements100-240 VACGeneralOperating SystemWindows 8.1 Pro (64-Bit)SecurityHDD User Password Protection, Power-On Password, Fingerprint ReaderDimensions (W x H x D)11.8 x 0.3 x 7.5" / 299.7 x 7.6 x 190.5 mmWeight1.81 lb / .82 kgAcer V226HQL OverviewThe V226HQL 21.5" 16:9 LCD Monitor from Acer is a V6-series monitor featuring DVI, HDMI, and VGA connectivity. It supports a 1920 x 1080 resolution and features a 5 ms response time, a 1000:1 native contrast ratio, a 250 cd/m² brightness rating, and support for 16.7 million colors. Additionally, you can adjust the tilt on the monitor or mount it to a VESA-compatible stand for your viewing comfort.Twisted Nematic Film (TN) technologyAcer eColor technologyAcer ComfyView innovations reduce glareEco-friendlyMagnetic area on stand for holding paperclips and keeping your desk orderlyVESA mount compatibility Acer V226HQL SpecsDisplaySize21.5"Panel TypeTN LCDTouchscreenNoResolution1920 x 1080Aspect Ratio16:9Pixels Per Inch (ppi)102 ppiFinishAnti-Glare / MatteMaximum Brightness250 cd/m2Contrast Ratio1000:1Dynamic Contrast Ratio100,000,000:1Refresh Rate60 HzVariable Refresh TechnologyNoneBit Depth / Color Support8-Bit (16.7 Million Colors)Response Time5 msInputs / OutputsInputs/Outputs1 x DVI1 x HDMI1 x VGAPowerPower Consumption19.7 W (Typical)0.45 W (Standby)AC Input Power120 to 230 VAC, 50 / 60 HzEnvironmentalCertificationsTCO Certified, as per ManufacturerPhysicalHeight AdjustmentNoneRotation AdjustmentNoneSwivel AdjustmentNoneTilt Adjustment-5 to 25°Mounting-Hole Pattern100 x 100 mmDimensions (W x H x D)20.0 x 15.4 x 8.1" / 50.8 x 39.1 x 20.6 cm (with Stand)20.0 x 12.0 x 2.0" / 50.8 x 30.5 x 5.1 cm (without Stand)Weight8.07 lb / 3.66 kg (with Stand)7.14 lb / 3.24 kg (without Stand)StarTech RKPW081915 OverviewProtect your equipment while adding eight additional power outlets to your server rack, with this 19in power distribution unit. This 8-outlet (120V 15A)(12A UL) Rack PDU delivers a cost-effective power distribution solution for your server rack/cabinet. The 1U PDU can be mounted horizontally in any server rack 19" in depth or greater, to provide eight 120V 15A power ports/outlets, and features a rugged steel casing to ensure maximum durability.The front of the PDU features two LEDs to indicate proper ground and surge detection while enabling you to control the power state with an illuminated power/reset switch. To prevent costly breakdowns of connected devices, the rackmount PDU features a built-in circuit breaker and reset switch, ensuring dependable performance of vital equipment.Key FeaturesLow pricepoint makes it ideal even for small rack setups with only a few devices, and powerful enough for enterprise configurationsGuaranteed compatibility with all 19in server racks, this PDU is the perfect addition to your StarTech.com rack solutionThis power distribution system consolidates your power source and enables you to control all powered device from one switchStarTech RKPW081915 SpecsGeneralDevice TypePower distribution unit - rack-mountableHeight (Rack Units)1URack Size19"ColorBlackPower DeviceInput VoltageAC 125 VInput Connectors1 x powerPower Output Connectors Details8 x power NEMA 5-15Output VoltageAC 125 VMax Electric Current15 ACircuit ProtectionCircuit breakerMiscellaneousCables IncludedPower cable - integrated - 6 ftFeaturesLED indicatorsCompliant StandardsEIA-310-D, UL, RoHS Middle Atlantic QBP-2 OverviewThe QBP-2 from Middle Atlantic is a 1 RU blower panel with a pair of custom-designed blowers that provide cooling to equipment stored in credenzas and small rack systems. It features a UL-listed power supply, 9’ power cord, and a black powder-coat finish.The fans switch on or off and speed up depending on the temperature inside the rack, thereby ensuring low power consumption. In addition, the blower provides high static pressure to ensure steady airflow, even in cramped racks. The blower panel offers a displacement of 100 CFM with minimal noise (32 dB), allowing for quiet operation, even at high speeds.Custom-designed blowers provide cooling to the A/V equipment stored in credenzas and small rack systemsBlower provides high static pressure to ensure steady airflow even in cramped racksProportional thermostatic control only runs when neededUnit operates at only 32 dB while moving 100 CFMBlack powder-coat finish Middle Atlantic QBP-2 SpecsRack Size1 RUComponent TypeActiveVolts12Airflow100 CFM (2.8 m³/min)Current Draw840 mA @ 12 VDCSound Level32 dBA @ 1 mMaximum Static Pressure0.31" H²0 (77.22 Pa)ListingsRoHSGREENGUARDUL E318571UL Standards Tested: 507FinishBlack powder-coatDimensions19.0 x 1.8 x 10.1" / 482.6 x 44.5 x 256.5 mm SKB 1SKB-ISF4U OverviewThe Injection-Molded 4-RU Studio Flyer Rack Case from SKB is a virtually indestructible waterproof injection-molded case that is lightweight and includes molded-in front and rear rack rails to provide better security and durability for studio equipment during travel. It can be used to store and transport your gear to and from events and gigs.The 4-RU case's rackmounts measure 15" from front rail to rear rail to accommodate deeper equipment. It also provides a 21 x 15.5" adjustable work surface with ample room for laptops or monitors and is equipped with a molded exterior pattern that stacks securely with all SKB Roto Racks for maximum transport convenience. Other features include improved quiet-glide wheels, an easy-to-operate one-button pull handle, and TSA-accessible locking trigger latches.Waterproof & impact-resistantInnovative molded-in front/rear rack rails4-RU rack and laptop combo case8 rubber cleats to hold laptop in position during transportation15" front rail to rear rail depthLaptop work surface: 21 x 15.5"Quiet-glide wheels and pull handleMade in the USASKB 1SKB-ISF4U SpecsGeneralCase TypeRack CaseRack Form Factor4 RUATA-CompliantNoPhysicalInterior Depth15" / 38.1 cm (Rail to Rail)IP RatingNoneExterior Dimensions (W x H x D)18.5 x 12.8 x 24" / 47.0 x 32.4 x 61.0 cm

Price: 6000 USD

Location: Winfield, West Virginia

End Time: 2024-09-11T18:34:56.000Z

Shipping Cost: 135 USD