Description: Compact Low Profile Load Cell (SGSENSE) Compact Low Profile Load Cell 500N Capacity Amplified Voltage Output W CAN bus Product Description: Compact Low-Profile load cells are fully stainless steel hermetically sealed load cells with a multi-beam internal structure and fully integrated electronics to provide high-level analog or digital outputs. This type of load cell is easy to use for measuring tension or compression loads from 200N (50lb) to 5kN (1000lbf) and is capable of rejecting side forces that would otherwise affect accuracy. This type also offers the user the ability to set the gain and offset (span and zero) electronically to provide maximum flexibility for the user application. For detail specification, please visit: Compact Low Profile Load Cell (SGCLP) - SGSENSE (sgsensetech.com) Specification Parameter Range Notes Rated load 200, 500, 1000, 2000 & 5000N 50, 100, 200, 500 & 1000lbf Proof load 150% of rated load No effect on calibration Ultimate load 200% of rated load No structural failure (deformation only) Deflection <0.05 mm Depends on rated load Natural frequency >1000 Hz Depends on rated load Output at rated load (RO) 1-9 V or 4-20mA or CAN or RS485 or mV/V Select when ordering Non-linearity <= 0.1% RO Hysteresis <= 0.1% RO Repeatability <= 0.03% RO Creep over 20 minutes <= 0.03% RO Output (span) tolerance factory setting ±0.1% range ±50% RO Adjustable via electronic interface. See user manual for details Offset (zero balance) factory setting ±1.0% range ±50% RO Adjustable via electronic interface. See user manual for details Output (span) temp coefficient ±0.005% load / °C Offset (zero) temp coefficient ±0.005% RO / °C Compensated temp range -10°C to +50°C Operating temp range -40°C to +85°C Power supply 12 to 24 VDC <40mA Insulation resistance >=5 Gohm @ 50 VDC Connector Analog O/P: 8-pin M12 male hermetic Digital O/P: 5-pin M12 male hermetic ESD safe EMC compliant with EN61326-2-3:2006 CE marked Protection class IP68 Fully stainless-steel construction laser welded Weight 750 g Bridge resistance 700 Ohms Nom. Dimensions Dimensions – mm [inch] Capacity (N) Centre thread size (through) Outer bolt size 200, 500 M8 x 1.25 M6 Socket Head Screw 1000, 2000, 5000 M12 x 1.75 M6 Socket Head Screw Capacity (lbf) Centre thread size (through) Outer bolt size 50, 100, 200, 500, 1000 3/8-24 UNF-2B ¼” Socket Head Screw Wiring Codes Pin Voltage Output Current Output CAN RS485 mV/V 1 Supply (+) Supply (+) Shield Supply (+) Supply (+) 2 Supply (-) TEDS GND Supply (-) TEDS GND Supply (+) RS485_A Supply (-) 3 Signal (+) Current loop (+) Ground Ground Signal (+) 4 Signal (-) Current loop (-) CAN_H RS485_B Signal (-) 5 TEDS DATA/ Shunt calibration (Optional) TEDS DATA/ Shunt calibration (Optional) CAN_L Shield N/A 6 Calibration interface A Calibration interface A N/A N/A N/A 7 Calibration interface B Calibration interface B N/A N/A N/A 8 Calibration interface C Calibration interface C N/A N/A N/A 9 Order Details Model (Capacity in N) Model Capacity (N) Description 1010-10 200 1 mV/V Output. With M12H connector (hermetic) 1020-10 500 1 mV/V Output. With M12H connector (hermetic) 1030-10 1000 1 mV/V Output. With M12H connector (hermetic) 1040-10 2000 1 mV/V Output. With M12H connector (hermetic) 1050-10 5000 1 mV/V Output. With M12H connector (hermetic) 1010-20 200 Amplified Output (4-20mA). With M12H connector. 1020-20 500 Amplified Output (4-20mA). With M12H connector. 1030-20 1000 Amplified Output (4-20mA). With M12H connector. 1040-20 2000 Amplified Output (4-20mA). With M12H connector. 1050-20 5000 Amplified Output (4-20mA). With M12H connector. 1010-30 200 Amplified Output (1-9V). With M12H connector 1020-30 500 Amplified Output (1-9V). With M12H connector 1030-30 1000 Amplified Output (1-9V). With M12H connector 1040-30 2000 Amplified Output (1-9V). With M12H connector 1050-30 5000 Amplified Output (1-9V). With M12H connector 1010-40 200 Amplified Output (CAN/RS485). With M12H connector 1020-40 500 Amplified Output (CAN/RS485). With M12H connector 1030-40 1000 Amplified Output (CAN/RS485). With M12H connector 1040-40 2000 Amplified Output (CAN/RS485). With M12H connector 1050-40 5000 Amplified Output (CAN/RS485). With M12H connector Model (Capacity in lbf) Model Capacity (lbf) Description 1110-10 50 1 mV/V Output. With M12H connector (hermetic) 1120-10 100 1 mV/V Output. With M12H connector (hermetic) 1130-10 200 1 mV/V Output. With M12H connector (hermetic) 1140-10 500 1 mV/V Output. With M12H connector (hermetic) 1150-10 1000 1 mV/V Output. With M12H connector (hermetic) 1110-20 50 Amplified Output (4-20mA). With M12H connector. 1120-20 100 Amplified Output (4-20mA). With M12H connector. 1130-20 200 Amplified Output (4-20mA). With M12H connector. 1140-20 500 Amplified Output (4-20mA). With M12H connector. 1150-20 1000 Amplified Output (4-20mA). With M12H connector. 1110-30 50 Amplified Output (1-9V). With M12H connector 1120-30 100 Amplified Output (1-9V). With M12H connector 1130-30 200 Amplified Output (1-9V). With M12H connector 1140-30 500 Amplified Output (1-9V). With M12H connector 1150-30 1000 Amplified Output (1-9V). With M12H connector 1110-40 50 Amplified Output (CAN/RS485). With M12H connector 1120-40 100 Amplified Output (CAN/RS485). With M12H connector 1130-40 200 Amplified Output (CAN/RS485). With M12H connector 1140-40 500 Amplified Output (CAN/RS485). With M12H connector 1150-40 1000 Amplified Output (CAN/RS485). With M12H connector Note for the valuable customers:Free shipping is provided. Please contact the seller for higher quantities. Product has been designed, developed and manufactured under AS9100 Quality Standard. We are shipping from Sri Lanka: Express shipping with UPS/FedEx/DHL (5-7 working days)Processing time is 10 working days. Our Motto Precision, Repeatable, and Reliable Measurement Solutions..! 0.08mm [.003”]
Price: 804 USD
Location: Colombo
End Time: 2024-11-19T14:50:25.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Connector: Analog O/P: 8-pin M12 male, hermetic Digital O/P: 5-pin M12 male
Shield: Shielded
Proof load: 150% of rated load
Deflection: 0.05 mm
Output Type: Voltage
Bridge resistance -: 700 Ohms Nom.
MPN: SGCLP-CAN68-500N
Power supply: 12 to 24 VDC, 40mA
Rated load: 200, 500, 1000, 2000 & 5000N or 50, 100, 200, 500 & 1000lbf
Current Type: DC
Unit Type: lb
Offset (zero) temp coefficient: ±0.005% RO / °C
Termination Type: Cable with Connector
Sensor Type: Electromechanical
Protection class: IP68,IP69
Compatible Mounting Type: Through Hole
Output (span) temp coefficient: ±0.005% load / °C
Operating temperature range: -40°C to +85°C
Repeatability -: = 0.03% RO
Insulation resistance: = 5 Gohm @ 50 VDC
Weight: 750 g
Brand: SGSENSE
Natural frequency: 1000 Hz
Creep over 20 minutes: = 0.03% RO
Non-linearity -: = 0.1% RO
Compensated temperature range: -10°C to +50°C
Country/Region of Manufacture: Sri Lanka
Offset (zero balance): factory setting ±1.0% range ±50% RO
Output (span) tolerance: factory setting ±0.1% range ±50% RO
Ultimate load: 200% of rated load
